Power Seat Control Module: Service and Repair

DRIVER SEAT CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the seat cushion outer trim panel.
2. Remove the three screws (1) retaining the driver seat control module (2) to the seat cushion outer trim panel (3).
3. Remove the driver seat control module (2) from the seat cushion outer trim panel (3).

INSTALLATION PROCEDURE




1. Position the driver seat control module (2) to the seat cushion outer trim panel (3).
2. Install the three screws (1) to the driver seat control module (2).

NOTE: Refer to Fastener Notice.

Tighten the driver seat control module retaining screws to 2 N.m (18 lb in).

3. Install the seat cushion outer trim panel.