Front

Inflatable Restraint Front End Sensor Replacement






Caution: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.

Preliminary Procedure:
Disable the supplemental inflatable restraint (SIR) system.

1. Supplemental Inflatable Restraint Front End Discriminating Sensor Bolt.

Notice: Refer to Fastener Notice in Cautions and Notices.

Tip: Loosen the TORX head bolt in order to remove sensor. The
bolt has left hand threads.

Tighten 8 N.m (71 lb in)

2. Supplemental Inflatable Restraint Front End Discriminating Sensor Assembly.

Procedure:

1. Slide the sensor towards the front of vehicle to guide the sensor bolt out of release slot.

2. Disconnect the electrical connector.