Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2006 >> Wave (CANADA) L4-1.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Engine Block Heater >> Service and Repair >> Coolant Heater Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Coolant Heater Replacement



Coolant Heater Replacement
Removal Procedure





1. Drain the cooling system. Refer to Draining and Filling Cooling System.

2. Important: A residual amount of coolant will drain from engine block.

Disconnect the coolant heater power supply cord from the coolant heater.
3. Remove the coolant heater and seal from the engine block.

Installation Procedure





1. Install the seal to the coolant heater.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the coolant heater in to the engine block.
Tighten the coolant heater to 60 Nm (44 ft. lbs.).
3. Connect the coolant heater power supply cord to the coolant heater.
4. Fill the cooling system. Refer to Draining and Filling Cooling System.
pro multis · About Operation CHARM