Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Service and Repair



KNOCK SENSOR (KS) REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Remove the intake manifold.
3. Disconnect the knock sensor (KS) electrical connector.
4. Remove the KS.

INSTALLATION PROCEDURE




1. Install the KS with the bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the KS bolt to 20 N.m (15 lb ft).

2. Connect the KS electrical connector.
3. Install the intake manifold.
4. Connect the negative battery cable.