Cylinder Head Assembly

Cylinder Head

Measure the height of the cylinder head from sealing surface to sealing surface. The cylinder head height should be 134.08 - 134.23 mm (5.279 - 5.285 inch). If the cylinder head height is less than this value, replace the cylinder head.





Camshaft Cap Bolts 16 Nm (12 ft. lbs.)





Cylinder Head Bolts - Camshaft Support Housing and Cylinder Head Mounting Bolts 25 Nm+60°+60°+60°+15° (18 ft. lbs.+60°+60°+60°+10°)

Camshaft Gear Bolt 67.5 Nm (49 ft. lbs.)





Exhaust Manifold Nuts 25 Nm (18 ft. lbs.)





Intake Manifold Retaining Nuts 25 Nm (18 ft. lbs.)
Intake Manifold Support Bracket Lower Bolt-to-Engine Block 40 Nm (30 ft. lbs.)
Intake Manifold Support Bracket Upper Bolts 25 Nm (18 ft. lbs.)