Multifunction Turn Signal Switch Housing Replacement

Multifunction Turn Signal Switch Housing Replacement

Removal Procedure




1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.
2. Remove the SIR coil (3). Refer to Inflatable Restraint Steering Wheel Module Coil Replacement.
3. Disconnect the electrical connectors from the multifunction switches.
4. Remove the multifunction switch housing (2) from the steering column (1).

Installation Procedure




1. Install the multifunction switch housing (2) to the steering column (1).
2. Connect the electrical connectors to the multifunction switches.
3. Install the SIR coil (3). Refer to Inflatable Restraint Steering Wheel Module Coil Replacement.
4. Enable the SIR system. Refer to SIR Disabling and Enabling.