Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2007 >> Grand Prix V6-3.8L SC >> Repair and Diagnosis >> Heating and Air Conditioning >> Heater Hose >> Service and Repair >> Heater Pipes Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heater Pipes Replacement



Heater Pipes Replacement

Tools Required

J 38185 Spring Hose Clamp Pliers

Removal Procedure

1. Remove the air cleaner assembly.
2. Drain the cooling system. Refer to Draining and Filling Cooling System (L26, L32 GE 47716 Fill) Draining and Filling Cooling System (L26, L32 Static Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and Filling Cooling System (LS4 Static Fill) in Cooling System.




3. Release and reposition the heater inlet and outlet hose clamps using the J 38185.

Important: Cap or plug the cooling components to prevent system contamination.

4. Remove the heater hoses from heater pipes.

Notice: Do not apply excessive force on the heater core pipes during hose removal. Applying excessive force on the heater core pipes may damage the heater core pipes.




5. Remove the heater pipe assembly retaining bolts from the rear the of engine.




6. Remove the heater pipe assembly retaining bolt from the front of the engine.
7. Release and reposition the heater pipe hose clamps at the engine using the J 38185.
8. Remove the heater pipe hoses from the engine.
9. Remove the heater pipe assembly from the vehicle.

Installation Procedure




1. Using a lint-free clean, dry cloth, carefully clean the sealing surfaces of the heater pipe assembly at the engine and heater hoses.
2. Install the heater pipe assembly into position in the vehicle.
3. Install the heater pipe hoses to the engine.
4. Reposition and release the heater pipe hose clamps at the engine using the J 38185.
5. Loosely install the heater pipe assembly retaining bolt to the front of the engine.






Notice: Refer to Fastener Notice in Service Precautions.

6. Install the heater pipe assembly retaining bolts to the rear of the engine.

Tighten all the heater pipe assembly bolts to 16 N.m (12 lb ft).




7. Connect heater hoses to the heater pipe assembly.
8. Install the heater hose clamps into position using the J 38185.
9. Install the air cleaner assembly.
10. Fill the cooling system. Refer to Draining and Filling Cooling System (L26, L32 GE 47716 Fill) Draining and Filling Cooling System (L26, L32 Static Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and Filling Cooling System (LS4 Static Fill) in Cooling System.

pro multis · About Operation CHARM