Exhaust Gas Recirculation Outlet Pipe Replacement

Exhaust Gas Recirculation Outlet Pipe Replacement

Removal Procedure




1. Remove the air cleaner intake duct.
2. Remove the exhaust gas recirculation (EGR) outlet pipe bolt (2) from the intake manifold.
3. Remove the EGR outlet pipe nut (3) from the EGR valve inlet adapter pipe (1).
4. Remove the EGR valve outlet pipe (1).

Installation Procedure




1. Install the EGR valve outlet pipe (1).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the EGR outlet pipe bolt (2) to the intake manifold.

Tighten the bolt to 25 N.m (18 lb ft).

3. Install the EGR outlet pipe nut (3) to the EGR valve inlet adapter pipe.

Tighten the nut to 25 N.m (18 lb ft).

4. Install the air cleaner intake duct.