Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2007 >> Grand Prix V6-3.8L SC >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Reservoir >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Washer Reservoir: Service and Repair



WASHER SOLVENT CONTAINER REPLACEMENT

REMOVAL PROCEDURE
1. Raise the hood.
2. Drain the washer solvent from the washer solvent container.




3. Remove the upper washer solvent container screw.
4. Remove the right front fender liner.




5. Disconnect the washer pump hose.
6. Disconnect the washer pump electrical connector.
7. Disconnect the washer solvent level sensor electrical connector.
8. Remove the washer pump from the container.
9. Remove the level sensor from the container.




10. Remove the lower washer solvent container screws.
11. Remove the washer solvent container from the right frame rail.

INSTALLATION PROCEDURE




1. Position the washer solvent container to the right frame rail.

2. NOTE: Refer to Fastener Notice.

Install the lower washer solvent container screws.

Tighten the screws to 10 N.m (89 lb in).




3. Install the washer pump to the container.
4. Install the level sensor to the container.
5. Connect the washer solvent level sensor electrical connector.
6. Connect the washer pump electrical connector.
7. Connect the washer pump hose.
8. Install the right front fender liner.




9. Install the upper washer solvent container screw.

Tighten the screw to 10 N.m (89 lb in).
10. Fill the washer solvent container with washer solvent.
11. Close the hood.
pro multis · About Operation CHARM