Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor Replacement (Left)



Knock Sensor Replacement (Left)

Removal Procedure




1. Drain the cooling system. Refer to Draining and Filling Cooling System (L26, L32 GE 47716 Fill) Draining and Filling Cooling System (L26, L32 Static Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and Filling Cooling System (LS4 Static Fill).
2. Disconnect the knock sensor electrical connector.




3. Remove the knock sensor bolt.
4. Remove the knock sensor.

Installation Procedure




1. Position the knock sensor.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the knock sensor bolt.

Tighten the bolt to 20 N.m (15 lb ft).




3. Connect the knock sensor electrical connector.
4. Fill the cooling system. Refer to Draining and Filling Cooling System (L26, L32 GE 47716 Fill) Draining and Filling Cooling System (L26, L32 Static Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and Filling Cooling System (LS4 Static Fill).