PCV Valve Hose: Service and Repair

Crankcase Ventilation Hoses/Pipes Replacement

Removal Procedure

1. Remove the fuel injector sight shield.




2. Disconnect the positive crankcase ventilation (PVC) fresh air pipe (1) from the air cleaner duct.
3. Remove the ignition control module bracket.




4. Disconnect the PVC fresh air pipe (1) from the valve cover.




5. Disconnect the PVC foul air pipe (4) from the PVC valve.
6. Remove the PVC foul air pipe retaining clip (2) and bolt (3) from the intake manifold.
7. Disconnect the PVC foul air pipe (4) from the intake manifold.

Installation Procedure




1. Connect the PVC foul air pipe (4) to the intake manifold.

Notice: Refer to Fastener Notice .

2. Install the PVC foul air pipe retaining clip (2) and bolt (3) to the intake manifold.

Tighten the bolt to 10 N.m (89 lb in).

3. Connect the PVC foul air pipe (4) to the PVC valve.




4. Connect the PVC fresh air pipe (1) to the valve cover.
5. Install the ignition control module bracket.




6. Connect the PVC fresh air pipe (1) to the air cleaner duct.
7. Install the fuel injector sight shield.