Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2007 >> Vibe L4-1.8L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Keyless Entry >> Keyless Entry Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Keyless Entry Module: Service and Repair



Remote Control Door Lock Receiver Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Remove the right upper quarter panel trim.




3. Disconnect the remote control door lock receiver electrical connector (2).
4. Remove the bolt (3) from the remote control door lock receiver (1).
5. Remove the remote control door lock receiver (1) from the vehicle.




6. Using a flat-bladed tool, remove the mounting bracket (1) from the receiver (2), if necessary.

Installation Procedure




1. Install the remote control door lock receiver (2) to the mounting bracket (1), if removed.




2. Install the remote control door lock receiver (1) to the vehicle.

Notice: Refer to Fastener Notice.

3. Install the bolt (3) to the door lock receiver (1).

Tighten the remote control door lock receiver bolt to 10 N.m (89 lb in).

4. Connect the remote control door lock receiver electrical connector (2).
5. Install the right upper quarter panel trim.
6. Connect the negative battery cable.
7. Reprogram the remote control door lock receiver, if necessary. Refer to Transmitter Programming. Programming and Relearning

pro multis · About Operation CHARM