Trunk / Liftgate Lock Cylinder: Service and Repair

LIFTGATE LOCK CYLINDER REPLACEMENT

REMOVAL PROCEDURE




1. Open the liftgate.
2. Remove the endgate trim panel.
3. Disconnect the 2 rods (1) from the lock cylinder.
4. Remove the 2 nuts (3) from the lock cylinder (2).
5. Remove the endgate lock cylinder (2) from the liftgate.

INSTALLATION PROCEDURE




1. Install the endgate lock cylinder (2) to the liftgate.
2. Install the 2 nuts (3) to the lock cylinder (2).
3. Connect the 2 rods (1) to the lock cylinder (2).
4. Install the liftgate trim panel.
5. Close the liftgate.