Daytime Running Lights (DRL) Control Module Replacement

DAYTIME RUNNING LIGHTS (DRL) CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE

1. IMPORTANT: The DRL control module is located under the driver side instrument panel.




Disconnect the DRL control module electrical connector (2).
2. Remove the screw which secures the DRL mounting bracket to the instrument panel.
3. Remove the DRL control module (1) with bracket from the instrument panel.
4. Remove the DRL control module (1) from the mounting bracket if necessary releasing the module case clip using a flat-bladed tool.

INSTALLATION PROCEDURE




1. Install the DRL control module (1) to the mounting bracket, if removed.
2. Install the DRL control module (1) with the mounting bracket attached to the instrument panel. Secure the bracket with the screw.
3. Connect the DRL control module electrical connector (2).