Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Starter Motor: Service and Repair



Starter Motor Replacement

Removal Procedure






Caution: Refer to Battery Disconnect Caution.

1. Disconnect the negative (-) battery cable.
2. Remove the starter motor electrical connector from the starter solenoid.
3. Remove the retaining nut and the positive (+) battery cable from the starter solenoid.
4. Remove the upper mounting bolt (1).
5. Remove the lower mounting bolt (2) and the starter motor from the vehicle.

Installation Procedure




1. Install the starter motor to the vehicle.
2. Install the upper mounting bolt finger tight (1).

Notice: Refer to Fastener Notice.

3. Install the lower mounting bolt (2).

Tighten the lower mounting bolt to 37 N.m (27 lb ft).

4. Tighten the upper mounting bolt (1).

Tighten the upper mounting bolt to 37 N.m (27 lb ft).

5. Install the starter motor electrical connector to the solenoid.
6. Install the positive battery cable and the retaining nut to the starter solenoid.

Tighten the retaining nut to 9.8 N.m (84 lb in).

7. Connect the negative (-) battery cable.

Tighten the negative battery cable to 15 N.m (11 lb ft).