Window Track: Service and Repair

DOOR WINDOW GUIDE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the rear side door trim.
2. Remove the rear water deflector.
3. Loosen the rubber window run channel along the center guide channel.
4. Remove the following components from the rear door:
- The 2 bolts (2)
- The 2 screws (3)
- The window guide channel (1)

INSTALLATION PROCEDURE

1. NOTE: Refer to Fastener Note.




Install the window guide channel (1) to the rear door. Secure the guide channel with the 2 bolts (2) and the 2 screws (3).

Tighten the window guide channel bolts to 6.2 N.m (55 lb in).

2. Install the rubber window run channel into the center guide channel.
3. Install the rear door water deflector.
4. Install the rear side door trim.