Rear Window Wiper Arm Replacement
NOTEREAR WINDOW WIPER ARM REPLACEMENT
TOOLS REQUIRED
J 39822 Wiper Arm Puller
REMOVAL PROCEDURE
1. Use tape or an erasable marker to mark position of wiper blade on the rear window.
2. Remove the cap from the rear wiper arm.
3. Remove the rear wiper arm nut.
4. Using J 39822, remove the rear wiper arm.
5. Remove the rear wiper blade from the rear wiper arm.
INSTALLATION PROCEDURE
1. Install the rear wiper blade onto the rear wiper arm.
2. Align the rear wiper blade with the mark on the rear window.
3. Install the rear wiper arm onto the rear wiper motor spindle.
NOTE: Refer to Fastener Note.
4. Install the rear wiper arm nut.
Tighten the nut to 5.5 N.m (4.0 lb ft).
5. Install the cap to the rear wiper arm.
6. Remove the mark from the rear window.