Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Negative: Service and Repair



Battery Negative Cable Replacement (With RPO Code LE5)

Removal Procedure




1. Disconnect the negative battery cable.
2. Remove the negative cable ground terminal nut at the tie bar.
3. Remove the negative battery cable clip (3) from the battery tray.




4. Remove the tape holding the positive cable to the negative cable.
5. Remove the negative cable from the retainers.
6. Raise and support the vehicle. Refer to Vehicle Lifting.
7. Remove the radiator lower air baffle.
8. Remove the engine harness ground lead bolt (1).
9. Remove the negative cable (6).

Installation Procedure




1. Install the negative cable.
2. Position the negative battery cable terminal (6) in front of the engine harness ground terminal (5).

Notice: Refer to Fastener Notice.

3. Install the engine harness ground lead bolt (1).

Tighten the bolt to 25 N.m (18 lb ft).

4. Install the radiator lower air baffle.
5. Lower the vehicle.
6. Install the negative cable to the retainers.
7. Install tape holding the positive cable to the negative cable.




8. Install the negative battery cable clip (3) to the battery tray.
9. Install the negative cable ground terminal nut at the tie bar.

Tighten the nut to 10 N.m (89 lb in).

10. Connect the negative battery cable.