Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2008 >> G8 V6-3.6L >> Repair and Diagnosis >> Maintenance >> Hoses >> Radiator Hose >> Service and Repair >> Radiator Hose Quick Connect Fitting
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Radiator Hose Quick Connect Fitting



Radiator Hose Quick Connect Fitting

Removal Procedure

1. Remove the radiator air baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement (Service and Repair) in Body Front End.
2. Drain the cooling system. Refer to Cooling System Draining and Filling (Service and Repair) .
3. Detach the radiator outlet hose. Refer to Radiator Outlet Hose Replacement (3.6L Engine) (Service and Repair)Radiator Outlet Hose Replacement (6.0L Engine) (Service and Repair) .




4. Remove the radiator support brackets (2) from top of radiator by rasing the securing lock (3) 10mm and then sliding the bracket off the radiator slide pin (1). Carry out same procedure for other bracket.
5. Raise and support the radiator assembly out of the rubber grommets located in the cross member.
Caution: Refer to Safety Glasses Caution (Safety Glasses Warning) .
Caution: Refer to Vehicle Lifting Caution (Service Precautions) .
6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
7. Remove the air deflector. Refer to Front Air Deflector Replacement (Service and Repair) .




8. Remove the retaining clip (2) from the outlet hose quick connect fitting (1).
9. Remove the outlet hose quick connect fitting (1) from the radiator assembly.



Installation Procedure





1. Install the outlet hose quick connect fitting retaining clip (2) to the quick connect fitting (1).
2. Install the outlet hose quick connect fitting (1) to the radiator spigot.
3. Install the outlet hose quick connect fitting retaining clip (2) slightly pull on the quick connect fitting to confirm fitting.
4. Install the air deflector. Refer to Front Air Deflector Replacement (Service and Repair) .
5. Lower the vehicle.
6. Attach the radiator outlet hose. Refer to Radiator Outlet Hose Replacement (3.6L Engine) (Service and Repair)Radiator Outlet Hose Replacement (6.0L Engine) (Service and Repair) .
7. Fill the cooling system. Refer to Cooling System Draining and Filling (Service and Repair) .
8. Install the radiator air baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement (Service and Repair) in Body Front End.


pro multis · About Operation CHARM