Rear Wheel Speed Sensor Replacement

Rear Wheel Speed Sensor Replacement

Removal Procedure





Caution: Refer to Safety Glasses Caution (Safety Glasses Warning) .
Caution: Refer to Vehicle Lifting Caution (Service Precautions) .
Caution: Refer to Brake Dust Caution (Brake Dust Caution) .
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Remove the rear wheels. Refer to Tire and Wheel Removal and Installation (Service and Repair) .
3. Disconnect the wheel speed sensor electrical connector (1).




4. Remove the wheel speed sensor to knuckle retaining bolt (3).
5. Remove the wheel speed sensor (2) from the knuckle (1).



Installation Procedure





Caution: Refer to Safety Glasses Caution (Safety Glasses Warning) .
Caution: Refer to Vehicle Lifting Caution (Service Precautions) .
Caution: Refer to Brake Dust Caution (Brake Dust Caution) .
1. Install the wheel speed sensor (2) to the knuckle (1).

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the wheel speed sensor to knuckle retaining bolt (3).

Tighten the bolt to 7 Nm (62 lb in).





3. Connect the wheel speed sensor jumper harness electrical connector (1).
4. Install the rear wheels. Refer to Tire and Wheel Removal and Installation (Service and Repair) .
5. Lower the vehicle.