Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2009 >> G3 L4-1.6L >> Repair and Diagnosis >> Heating and Air Conditioning >> Compressor HVAC >> Compressor Clutch Hub >> Service and Repair >> Compressor Clutch Plate/Hub Assembly Install (SP10 Compressor)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Compressor Clutch Plate/Hub Assembly Install (SP10 Compressor)




Compressor Clutch Plate/Hub Assembly Install (SP10 Compressor)




1. Place the clutch drive assembly to match the shaft serration with the drive hub serration.
2. Gently insert the clutch drive assembly.

Important: If the air gap is correct, proceed to the next step. If not, change the shim to meet the specified air gap.

3. Check the air gap with the feeler gage roughly by pressing the clutch drive assembly before fastening the shaft bolt.

0.3-0.7 mm (0.012-0.028 in)




4. Use the DW-610-010 clutch hub holding tool (1) to keep the clutch drive assembly from turning.
5. Place the washer before fastening the shaft bolt.

Tighten the shaft bolt to 12-15 Nm (106-133 lb in).

6. Recheck the air gap with the feeler gage.

pro multis · About Operation CHARM