Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2009 >> G3 L4-1.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Accelerator Pedal Position Sensor >> Service and Repair >> Without Variable Camshaft Phasing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Without Variable Camshaft Phasing




Accelerator Pedal Position Sensor Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).
1. Disconnect the negative battery cable.
2. Disconnect the electronic throttle control (ETC) connector from the accelerator pedal.
3. Remove the 3 accelerator pedal retaining nuts (1).
4. Remove the accelerator pedal (2).

Installation Procedure




1. Position the accelerator pedal.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 3 accelerator pedal retaining nuts (1).

Tighten the accelerator pedal retaining nuts to 19 Nm (14 lb ft).

3. Connect the ETC connector to the accelerator pedal.
4. Connect the negative battery cable.

pro multis · About Operation CHARM