Washer Fluid Level Switch: Service and Repair

Windshield Washer Solvent Level Switch Replacement

Removal Procedure

1. Remove the radiator assembly. Refer to Radiator Replacement (Service and Repair).




2. Disconnect the washer fluid level switch electrical connector (1).
3. Place a suitable container under the washer fluid level switch (2).
4. Remove the washer fluid level switch (2) from the washer fluid container and discard the rubber seal.

Installation Procedure





Important: Insert the washer fluid level switch into the washer fluid container until fully seated.


1. Install the washer fluid level switch (2) into the washer fluid container.
2. Connect the washer fluid level switch electrical connector (1).
3. Fill the washer solvent container with washer solvent.
4. Install the radiator assembly. Refer to Radiator Replacement (Service and Repair).