License Plate Lamp: Service and Repair

Rear License Plate Lamp Replacement

Removal Procedure




1. Using a flat-bladed tool, disconnect the retaining tabs (1).
2. Disconnect the license lamp electrical connector and remove the license lamp assembly.




3. Remove the license lamp bulb socket from the rear license lamp by turning counter clockwise.
4. Remove the license lamp bulb from the license lamp bulb socket.

Installation Procedure




1. Install the license plate lamp bulb to the license lamp bulb socket.
2. Install the license plate lamp socket to the license lamp by turning clockwise.
3. Connect the electrical connector.




4. Engage the retaining tabs and install the license lamp assembly