Accessory AC and DC Power Control Module Replacement

Accessory AC and DC Power Control Module Replacement

Removal Procedure

1. Remove the communication interface module. Refer to Communication Interface Module Replacement (Communication Interface Module Replacement).




2. Disconnect the clamp and connector.
3. Remove the 3 bolts (1) and the voltage inverter assembly.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the voltage inverter assembly with the 3 bolts (1).

Tighten the bolts to 19 Nm (14 lb ft).




2. Install the communication interface module (1). Refer to Communication Interface Module Replacement (Communication Interface Module Replacement).