Connecting Rod, Engine
Connecting RodConnecting Rod Large End Bore Diameter
Mark A 20.012-20.015 mm (0.7879-0.7880 in)
Mark B 20.016-20.018 mm (0.7880-0.7881 in)
Mark C 20.019-20.021 mm (0.7881-0.7882 in)
Connecting Rod Small End Bore Diameter
Mark 1 47.000-47.008 mm (1.8504-1.8507 in)
Mark 2 47.009-47.016 mm (1.8507-1.8510 in)
Mark 3 47.017-47.024 mm (1.8510-1.8513 in)
Maximum Rod Out-of-Alignment per 100 mm (3.94 in) 0.05 mm (0.0020 in)
Maximum Rod twist per 100 mm (3.94 in) 0.15 mm (0.0059 in)
Connecting Rod Cap Bolt
1st 20 Nm (15 lb ft)
2nd Turn 90°