Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2010 >> 911 Carrera 4S (997) F6-3.8L >> Repair and Diagnosis >> Body and Frame >> Exterior Moulding / Trim >> Underbody Cover >> Service and Repair >> 519419 Removing and installing Cover For Rear Underbody
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

519419 Removing and installing Cover For Rear Underbody





Removing And Installing Cover For Rear Underbody

Technical values







Preliminary work
Raise the vehicle.

Removing cover for rear underbody







INFORMATION: Fastening nuts cannot be used again following removal.







1. Unscrew fastening screws -2- and fastening nuts -3- .
2. Remove cover for rear underbody -1- .

Installing cover for rear underbody

INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.







1. Insert cover for rear underbody -1- .
2. Tighten fastening screws -2- and fastening nuts -3- . - Tightening torque: 2 Nm (1.5 ftlb.) - Tightening torque: 2.5 Nm (2 ftlb.)

Subsequent work

Reworking

Lower the vehicle.
pro multis · About Operation CHARM