Camber Setting

Fig. 3 Measuring camber:

DESCRIPTION
Caster refers to the angle at which a wheel leans in or out as shown, Fig. 3.Positive camber is when the wheel leans outward and negative camber is when the wheel leans inward.

FRONT CAMBER, ADJUST

Fig. 1 Front Suspension Components:

Camber is adjusted by placing shims or spacers under the two upper control arm bearing brackets, Fig. 4. Place the same thickness under both front and rear bracket.

REAR CAMBER, ADJUST
Camber cannot be adjusted. If setting is not within specified limits, defective components must be replaced.