Operation CHARM: Car repair manuals for everyone.
Home >> Saab >> 1987 >> 900 L4-1985cc 2.0L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Test Procedures >> B1E Checking the Fuel Pump Delivery Flow
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

B1E Checking the Fuel Pump Delivery Flow

B1E Checking the fuel pump delivery flow

1 Stop the pump by setting the switch to "OFF". Disconnect the return line at the fuel pressure regulator.

2 Connect one end of the return flow test hose to the fuel pressure regulator and place the other end in the 2-litre graduated beaker.

3 Start the fuel pump by setting the switch to "ON". Allow the pump to run for 30 seconds and then read off the volume of fuel in the beaker. It should be at least 0.9 liters (0.96 quarts).

4 If the pressure drops by more than 0.1-0.2 bar (1.5-2.9 psi) and the delivery flow is correct, fit a new fuel pressure regulator.

5 If the fuel pump delivery flow is not correct, carry out test procedure B1D.

pro multis · About Operation CHARM