Installation

1. Fit new 0-rings in connections. Lubricate them with synthetic vaseline.
2. Fill the flew desiccant container with 0.1 dl of clean compressor oil. Remember which oil to use.
3. Fit the desiccant container and tighten the connections.
4. Plug in electrical connections to pressure switch.
5. Place pipe in rubber lead-through and press on the rubber strip.
6. Fill the system with refrigerant. For more information refer to "Draining and Filling of Refrigerant-R134a or R12". Service and Repair
7. Carry out a performance test. For more information refer to "Cooling Performance Test, A/C System". Testing and Inspection