Brake Switch (Cruise Control): Service and Repair

Brake Pedal Switch

To remove







1 Remove the lower section of the dashboard.
2 Unplug the brake pedal switch connector.
3 Remove the brake pedal switch, using a screwdriver.

To fit







1 Spray the connector with kontakt 61 (part no.30 04 520).
2 Carefully pull out the switch's pushrod to its stop position.
3 Depress the brake pedal and fit the switch.
4 Carefully release the pedal.
5 Plug in the connector.
6 Fit the lower section of the dashboard

Brake Lights Switch

To remove







1 Remove the lower section of the dashboard.
2 Turn the brake light switch in any direction and then lift it out.
3 Unplug the connector.

To fit







1 Spray the connector with Kontakt 61 (part no.30 04 520).
2 Carefully pull out the switch's pushrod to its stop position.
3 Depress the brake pedal and fit the switch.
4 Carefully release the pedal.
5 Plug in the connector.
6 Fit the lower section of the dashboard.