Washer Fluid: Service and Repair

Removal







1 Empty the reservoir.
2 Remove the filler pipe and the plastic nut.
3 Raise the car and remove the wing liner at the front (3 screws).







5 Remove the pump and the level sensor from the reservoir and let them hang by their respective hoses and lead.
6 Remove the 2 retaining screws from the reservoir and pull the washer fluid reservoir downwards.

Refitting







1 Place the reservoir in its correct position and refit the retaining screws.
2 Refit the pump.
3 Refit the level sensor with its float pointing downwards.
4 Refit the wing liner at the front and lower the car.
5 Refit the plastic nut and the filler pipe.







6 Fill the reservoir with washer fluid.