Menu "Activate"

NOTE: When a system function is activated with the diagnostics tool, the control module executes a command which is not normal from a functional point of view. In activation mode the diagnostics tool checks the control module and the activation command should therefore be used with discrimination. An activated function will always be reset when you leave the activation mode and continue in the diagnostics tool's menu.

Always clear any diagnostic trouble codes that may have been generated in the transmission system or any other system when you have finished your work.

IMPORTANT: Activation mode can only be entered in selector lever position N. In other selector lever positions the diagnostics tool's display will show SHIFT TO N AND THEN PRESS ENTER. All activation commands can be canceled by pressing Exit.