Power Window Switch: Service and Repair

Cover, Rear Switch, Window Lift

To remove

1. Remove Rear door trim
2. Remove the door module.
- First detach the rear clip (A). Use a screwdriver.






- Then detach the clips (B) on the sides of the door module.
- Carefully pull the door module backwards/downwards.

3. Remove the cover.
- Detach the locking catches (A) from their mountings.






IMPORTANT: Make sure that the catches do not fasten in the trim.

- Remove the cover by pressing it upwards. Use a screwdriver.






To fit

1. Fit the cover.






2. Fit the door module. Make sure that the retaining clips lock (A/B).






3. Fit Rear door trim.