Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Piston Sizing
Pistons are available in .005 inch (.125 mm) and .0157 inch (.400 mm) oversizes.
To check
piston fit in bore, using suitable micrometer, measure piston diameter at right angle to
piston pin hole center line, .20 inch (5 mm) from bottom of piston. Piston diameter plus piston clearance minus .002 inch allowance for finish honing will give piston size to be bored to.