AR61.10-P-5708-04MCC Install Tank Support

AR61.10-P-5708-04MCC Install Tank Support

Shown on model 451.3







1 Fit tank support (1) together with tank and fasten with tank mounting bolts.
2 Drill 6.5 mm dia. rivet holes (area A).
3 Remove tank support (1) and tank.
4 Deburr rivet holes on tank support (1) and body on both sides.







5 Apply 2-component glue to mating surfaces in cross-hatched areas.
Thoroughly clean all bonding surfaces and do not coat with zinc dust paint, otherwise adhesion of the 2-component adhesive may be adversely affected.
Observe pretreatment of bonding surfaces. Observe manufacturer's specifications for drying and processing time of adhesive.







6 Fit tank support (1) and fasten with manual temporary fasteners.
7 Rivet tank support (1) with Polygrip flat/round head rivet, dia. 6.4 X 14 (areas A).