Connecting Rod Bearing: Service and Repair

AR03.10-P-6112-01MCC Assign Connecting Rod Bearing Shells







1. Assign connecting rod bearing shells for crankshaft (1) and the connecting rod (4).
Selection of the connecting rod bearing shells takes place over the three numbers (3) on the cheek of the crankshaft (1) and the numbers (arrow) on the associated connecting rod (4).
The first four numbers (2) are foreseen for the crankshaft bearing shells.
The connecting rod bearing shells should be assigned to the connecting rods (4) according to the sequence of the numbers (3).
The first bearing point is located opposite the output side of the engine.
Assignment takes place over a number placed on the side on the connecting rod bearing shells and can be taken from the following list.