Disassembly and Assembly

Evaporator Disassembly & Assembly

REMOVAL AND INSTALLATION
1) Disconnect battery negative terminal.
2) Discharge refrigerant using refrigerant recovery system.





3) Disconnect discharge pipe, suction pipe and grommets.





4) Remove glove box and pocket back panel.
5) Disconnect the harness connector from evaporator.
6) Disconnect drain hose.





7) Remove evaporator mounting bolt and nut.
8) Install the evaporator in the reverse order of removal.
9) Charge refrigerant.



DISASSEMBLY AND ASSEMBLY





1) Remove resistor assembly (1) and remove six screws from evaporator case.





2) Remove thermostat (1) from upper case.
Thermistor (2) is inserted into specified evaporator fin position.
When installing thermostat, be sure to insert thermistor into specified fin position.