Scan Tool Testing and Procedures

Inspection Mode

PROCEDURE

WARNING: Observe the traffic law during driving on roads.

1. Shift the select lever to D range, and then drive the vehicle with changing the gear from 1st to 5th.
2. When driving the vehicle at 5th speed of D range, set the gear to manual mode and drive the vehicle by downshifting using - of the select lever from 5th ->4th, 4th ->3rd, 3rd ->2nd, and 2nd -> 1st.

NOTE: At shifting down, drive the vehicle at least 10 seconds in each speed.

3. Shift the select lever to R range and drive the vehicle for more than 2 seconds.