Fuel Injector: Service and Repair

Intake Manifold (Part 1):

Intake Manifold (Part 2):

Fuel Injector

REMOVAL

RH SIDE
1. Release the fuel pressure.
2. Open the fuel filler flap lid, and remove the fuel filler cap.
3. Remove the collector cover.




4. Disconnect the ground cable from battery.
5. Remove the coolant filler tank.
6. Disconnect the connector from fuel injector.




7. Remove the screw and remove the fuel injector.

LH SIDE
1. Release the fuel pressure.
2. Open the fuel filler flap lid, and remove the fuel filler cap.
3. Remove the collector cover.




4. Disconnect the ground cable from battery.
5. Disconnect the connector from fuel injector.




6. Remove the screw and remove the fuel injector.

INSTALLATION

RH SIDE
Install in the reverse order of removal.

NOTE: Use new O-rings.

Tightening torque: 3.5 N.m (0.36 kgf-m, 2.6 ft-lb)

LH SIDE
Install in the reverse order of removal.

NOTE: Use new O-rings.

Tightening torque: 3.5 N.m (0.36 kgf-m, 2.6 ft-lb)