Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2010 >> Outback F6-3.6L DOHC >> Repair and Diagnosis >> Lighting and Horns >> Ambient Light Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ambient Light Sensor: Service and Repair

Light Control Sensor

REMOVAL

NOTE: The light control sensor is integrated with the sunload sensor.

1. Disconnect the ground cable from battery.
2. Remove the light control sensor.

CAUTION: Be careful not to damage the sensors and interior trims when removing.

1. Release the claws and clips, then detach the side speaker cover (RH).






2. Push out the light control sensor by pressing the left and right claws.
3. Disconnect the connector, and remove the light control sensor.






INSTALLATION

Install each part in the reverse order of removal.
pro multis · About Operation CHARM