License Plate Lamp: Service and Repair

License Plate Light

REMOVAL

1. SEDAN MODEL
1. Disconnect the ground cable from battery.
2. Remove the trunk lid trim.
3. Remove the trunk lid garnish.
4. Disconnect the connector and remove the bulb socket.






5. Remove the license plate light.






2. OUTBACK MODEL
1. Disconnect the ground cable from battery.
2. Remove the screws and remove the license plate light.






NOTE: When removing the license plate light assembly harness, remove the following parts.
- Rear gate garnish.
- Rear gate opener button.

INSTALLATION

Install each part in the reverse order of removal.