Installation

Installation

1. Installation of transmission revolution sensor (SP2)
(1) Apply auto fluid WS to a new O-ring and install it to the transmission revolution sensor (SP2).
(2) Install the transmission revolution sensor (SP2) with the bolt.
Standard value:T=5.4 Nm {55 kgf-cm} {4.0ft-lbf}
(3) Connect the connector.
(4) Install the automatic transmission ASSY.
2. Installation of transmission revolution sensor (NT)
(1) Apply auto fluid WS to a new O-ring and install it to the transmission revolution sensor (NT).
(2) Install the transmission revolution sensor (NT) with the bolt.
Standard value:T=5.4 Nm {55 kgf-cm} {4.0ft-lbf}
(3) Connect the connector.
3. Installation of engine under cover No.2
4. Installation of engine under cover No.1
5. Data monitor check Data Monitor/Active Test