Differential Fluid - CVT: Adjustments
ADJUSTMENTNOTE:
Immediately after removing the overflow drain plug, remaining gear oil (approx. 8 cc) may come out of the overflow pipe. This is not included in the specified amount. When removing the overflow drain plug, make sure the gear oil flows out of the overflow drain plug hole by filling with gear oil.
1) Lift up the vehicle.
2) Remove the filler plug.
3) Remove the overflow drain plug.
4) Fill in the differential gear oil through the filler plug hole up to where the oil flows out of the overflow drain plug.
5) When the flow of the differential gear oil turns into a narrow stream, install the overflow drain plug.
NOTE:
Use a new gasket.
Tightening torque:
50 Nm (5.1 kgf-m, 36.9 ft-lb)
6) Install the filler plug.
NOTE:
Use a new gasket.
Tightening torque:
50 Nm (5.1 kgf-m, 36.9 ft-lb)