Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2013 >> Outback F4-2.5L DOHC >> Repair and Diagnosis >> Body and Frame >> Mirrors >> Service and Repair >> Scalp Cap
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Scalp Cap

Scalp Cap







REPLACEMENT

1. MODEL WITHOUT ELECTRIC RETRACTABLE MIRROR

CAUTION:
- When removing the mirror, be careful not to damage the back surface of mirror with a flat tip screwdriver.
- When installing the mirror, insert the connector and clip securely.

1. Operate the remote control mirror switch to face the mirror surface upward.
2. Disconnect the ground cable from battery.
3. Remove the outer mirror.
1. Disconnect the clips using a flat tip screwdriver.







2. Disconnect the mirror heater connector. (Model with mirror heater)







4. Disconnect the claws and then remove the scalp cap.

CAUTION: Be careful not to apply excessive force when removing the scalp cap, as the lower hooks may become damaged.







5. Engage the claws into the hole and install the scalp cap.







6. Check that all the claws are securely engaged.

2. MODEL WITH ELECTRIC RETRACTABLE MIRROR

CAUTION:
- When removing the mirror, be careful not to damage the back surface of mirror with a flat tip screwdriver.
- When installing the mirror, insert the connector and clip securely.

1. Operate the remote control mirror switch to face the mirror surface upward.
2. Disconnect the ground cable from battery.
3. Remove the outer mirror.
1. Using a flat tip screwdriver, release the clips then remove the outer mirror by sliding downward.







2. Disconnect the mirror heater connector. (Model with mirror heater)







4. Disconnect the claws and then remove the outer mirror lower cover.







5. Disconnect the claws and then remove the scalp cap.

CAUTION: Be careful not to apply excessive force when removing the scalp cap, as the lower hooks may become damaged.







6. Engage the claws into the hole and install the scalp cap.







7. Engage the claws into the hole and install the outer mirror lower cover.







8. Check that all the claws are securely engaged.
9. Install the outer mirror in the reverse order of removal.
pro multis · About Operation CHARM