Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 1993 >> Swift L4-1298cc 1.3L DOHC 3 MFI 16V >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oxygen Sensor: Service and Repair

Removing Oxygen Sensor:





WARNING: To avoid danger of being burned, do not touch exhaust system when system is hot. Oxygen sensor removal should be performed when system is cool.


REMOVAL
- Disconnect negative cable from battery.
- Disconnect coupler of oxygen sensor and release its wire harness from clamps.
- Remove oxygen sensor from exhaust manifold.


INSTALLATION
- Reverse removal procedure noting the following.
- Tighten oxygen sensor to specified torque.


TIGHTENING TORQUE
45 - 55 N-m (4.5 - 5.5 kg-m, 33.0 - 39.5 lb-ft)

- Connect coupler of oxygen sensor and clamp wire harness securely.
- After installing oxygen sensor, start engine and check that no exhaust gas leakage exists.


pro multis · About Operation CHARM