Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 1997 >> Esteem GL L4-1.6L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Pick-Up Coil >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pick-Up Coil: Service and Repair

1. Remove distributor cap and rotor.
2. Remove CMP sensor (signal generator) securing screws and lead wire clamp screws.
3. Replace CMP sensor (signal generator).
4. Using thickness gauge, measure air gap, between signal rotor tooth and CMP sensor (generator).

Signal rotor air gap "a": 0.2 - 0.4mm (0.008 - 0.016in.)





5. If gap is out of specification, loose CMP sensor (signal generator) securing screws. Using blade (-) screw driver, move CMP sensor (generator) and adjust gap to specification. After adjustment, tighten securing screws and recheck gap.

NOTE: Check to make sure that CMP sensor (signal generator) tooth is free from any metal particles.

6. Install rotor, distributor cap seal and cap.
pro multis · About Operation CHARM