Rear Wiper Motor

Rear Wiper Motor

Wiper Motor
Use a 12 V battery to connect its (+) and (-) terminals to terminal "L" and terminal E" respectively. Then motor should
rotate at 35 to 45 rpm.




Automatic Stop Operation
1. Connect battery positive terminal to terminal "L" and its negative terminal to terminal "E" and let the motor turn.
2. Disconnect terminal "L" from battery positive terminal and let the motor stop.
3. Connect terminal "B" to battery positive terminal. Observe the motor turns once again then stops at a specified position.
4. Repeat Step 1) to 3) several times, and check that the motor stops at the specified position every time.