Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Disassembly and Assembly

Sliding Roof

Disassembly
1. Be sure that sliding roof is "CLOSE" state.




2. Remove rear drip (1).
3. Pull out sunshade by sliding it.




4. Remove drip rail (1).
5. Remove sliding motor assembly.




6. Move cable assembly (1) fully to the direction shone in figure.
7. Remove sliding roof deflector.




8. Pull out drip show (1), guide and cable assembly as a set.

Assembly
Reverse disassembly procedure for assembly, noting the following point.

CAUTION: Match protrusion (2) of guide (3) and dent (1) in cable for completely closed position of sliding roof drive cable and match marks (holes (5)) for completely closed position of sliding roof motor assembly (4) and then install sliding roof motor assembly (4).




- Apply butyl rubber sealant to contact surface "A" of the rear drip (6).