Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heater Blower Unit

Removal
1. Disconnect negative (-) cable at battery.
2. Disable air bag system, if equipped. Refer to "Disabling Air Bag System:".
3. Open glove box, then remove screw.
4. Remove glove box.




5. Remove passenger lower member (1).




6. Remove ECM (1) with bracket (2) from blower motor unit (4).




7. Disconnect blower motor, blower motor relay (2) and resistor lead wires at couplers (3).
8. Remove cooling unit (If equipped). Refer to "Heater Unit Removal and Installation:".
9. Disconnect fresh air control cable from blower motor case.




10. Remove fastening nuts (1), remove blower motor unit.

Installation
1. Reverse removal procedure for installation.
2. Connect fresh air control cable referring to "Heater Control Cables Removal and Installation:".
3. Enable air bag system, if equipped. Refer to "Enabling Air Bag System:".